DIY Toony Point Nose Dragon Fursuit Head Kit Dragon Fursuit Head Blank for Moving Jaw Fursuit Head Base Kids Fursuit Mask Furry Cosplay Mask

This specific listing is for a full KIT, not just the stand-alone base. If you want just a head base, find it here:
https://www.etsy.com/BeansInThings/listing/1114100117/diy-kit-tiger-fursuit-cosplay-costume

This kit includes the following:

> One Point Nosed Dragon Foam Head Base (you choose how it is prepared)

> A 4" x 6" Sheet of Vinyl Mesh
> One pair of matching Resin Eye Frames
> 1 Budget Balaclava
> 2 - 8" x 10" Sheets of 2mm EVA Foam (1 black and 1 white)
> 1 - 8" x 10" Sheet of 1/2" thick Upholstery Foam
> 6 inches of two inch wide Elastic

Your choice of:
> 1 Small Pink Forked Reptile Fursuit Tongue
[OR]
>1 Small Pink Pointed Bird Fursuit Tongue

OPTIONS:

Whole Base: Your base is a solid, uncut, expanding foam Base. Only the molding flashing has been trimmed off.

Cut and Hollowed: Your base will be cut in half as shown in the images, and hollowed out to a smooth, even thickness. This is usually around 1/2 inch with a 3/8-5/8ths margin.

Cut, Hollowed and Lined: Your base will be cut and Hollowed as above, and then lined in a combination of stretched and sewn fleece. The fleece is our standard donut galaxy fleece and will be curled over edges so you may sew the fur to it.

Assembled, Ready to Fur:
Your base will be cut and hollowed and then your kit will be fully assembled for you! Nifty! Your head will be lined in quilted spandex with fleece underneath, all the way to the neck, have a foam back added, elastic straps, ears, tongue, teeth and eyes installed. The jaw will be static. I cannot do moving jaws. Instead of blank mesh, you may choose any one pair of eyes from our shop (NO HETEROCHROMIA, NO CUSTOM EYES) to be pre-installed to your choice of white or black eye frames. If you need custom, the eyes will NOT be installed, and I will leave the eye frames and blank mesh in the bag for you to install yourself.


The fursuit headbase is hand cast in high quality expanding foam, molded from one of my very own sculptures. It is soft and squishable making it great for beginners and experienced DIY crafters alike. The soft foam is easily cut with an electric bread knife or even carved out by hand with some patience and a pair of scissors.

If you don't want to carve it out yourself, I can even do it for you (for the cost of my time, of course!) I have options of uncut bases, cut apart and cut and hallowed out bases for any needs you might have.

My bases measure approximately 12 " Long x 11" High x 12 " Wide. These are already made and ready to ship as soon as payment has cleared!

These are made by hand, one at a time and may have minor surface imperfections and bubbles. This is normal and should not affect your finished project. :)

These are made in a home with Cats and Birds, and while I keep them away, I am not responsible for possible contamination so be aware if you have allergies.

🐾 Like my work? Want head up of brand new products, pre-order and commissions access and monthly deals and coupons? Subscribe to my Patreon!🐾

http://www.patreon.com/beansinthingz/


I ship on Monday's and Fridays.